Call us 24/7+86 13395077993
My Header Store Notice
Call us 24/7+86 13395077993

Category: Company News

Home / Company News (Page 13)
2026-01-20 BY
IN Company News

Bently 86691-01250-0400-15 Vibration Monitoring Sensor

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

 

Intermediate Document

Document Reference: Bently 86691-01250-0400-15
Generated Date: January 20, 2026
1. Document Purpose
This intermediate document acts as a provisional record for the Bently component with reference number Bently 86691-01250-0400-15. It captures preliminary engineering data, quality assurance checklists, and manufacturing status updates that require further validation and sign-off prior to the issuance of the final official documentation.
2. Component Identification
• Component Number: Bently 86691-01250-0400-15
• Component Category: Vibration Monitoring Sensor
• Revision Stage: Intermediate (Draft 2)
• Compliance Standard: API 670:2014
• Manufacturing Location: Houston, TX, USA
Bently 86691-01250-0400-15 Vibration Monitoring Sensor
3. Important Notes
This document is a work-in-progress and shall not be used for final production, procurement, or customer distribution. All technical parameters and specifications related to Bently 86691-01250-0400-15 are subject to change without prior notification. Unauthorized reproduction, distribution, or commercial utilization of this document is strictly prohibited. For any clarification, contact the Bently Document Control Department.
Confidential – Internal Bently Use Only
Document Control Identifier: INT-BENTLY-86691-01250-0400-15-2026
Expiry Review Date: March 20, 2026
2026-01-20 BY
IN Company News

LAM 810-049000-108 Module Controller

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

 

Intermediate Document

Document Reference: LAM 810-049000-108
Generated Date: January 20, 2026
1. Document Purpose
This intermediate document serves as a transitional record for the part with reference number LAM 810-049000-108. It contains preliminary technical specifications, quality control checkpoints, and production progress notes that are subject to final review and approval before formal documentation is issued.

Related Series:

LAM 810-049000-108

LAM 810-049000-007

LAM 661-097953-001

LAM 810-046015-010

LAM 810-049000-108 Controller

2. Part Identification
• Part Number: LAM 810-049000-108
• Part Type: Industrial Component
• Revision Status: Intermediate (Draft 1)
• Applicable Standard: ISO 9001:2015
3. Notes
This document is not intended for final use or distribution. All data contained herein is provisional and may be modified without prior notice. Any use of this document for commercial purposes is prohibited without written authorization from the document owner.
Confidential – For Internal Use Only
Document Control ID: INT-LAM-810-049000-108-2026
2026-01-19 BY
IN Company News

Rexroth VT-MUXA2-1-10/V0/1A Hydraulic Signal Multiplexer Module

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

 

The Rexroth VT-MUXA2-1-10/V0/1A is a high-performance hydraulic signal multiplexer module designed for centralized control of electro-hydraulic proportional valves in industrial and mobile hydraulic systems. This module is part of Bosch Rexroth’s proven VT series of control components, enabling efficient signal distribution and precise control of multiple hydraulic actuators.

Engineered for rugged industrial environments, the VT-MUXA2-1-10/V0/1A features a compact, modular design with high electromagnetic compatibility (EMC) and vibration resistance, making it ideal for use in construction machinery, industrial presses, and automated manufacturing systems.

Related Series:

REXROTH R431003806 

REXROTH R431003808 

REXROTH R901089559 VT-VPCD-1-16/V0/1-P-1

REXROTH VT-HNC100-1-23/W-08-P-0

Rexroth VT-MUXA2-1-10/V0/1A Hydraulic Signal Multiplexer Module

2. Technical Specifications

  • Supply Voltage: 24 VDC ±10% (19.2-26.4 VDC)
  • Input Signals: 0-10 VDC (analog) / 4-20 mA (configurable)
  • Output Channels: 10 independent proportional valve control outputs
  • Output Current: Up to 1A per channel (continuous)
  • Response Time: < 5 ms (0-100% signal)
  • Operating Temperature: -25°C to +70°C (-13°F to +158°F)
  • Protection Rating: IP65 (housing) / IP20 (connector side)
  • Dimensions: 185mm (L) × 105mm (W) × 65mm (H)
  • Mounting: DIN rail (35mm) or panel mount (M4 threaded holes)
  • Communication: Optional CANopen (DS 301 / DS 402) for bus control

3. Installation & Commissioning

  1. Mount the module on a 35mm DIN rail in a protected control cabinet, away from high-temperature hydraulic components.
  2. Connect the 24 VDC power supply to terminals L+ (positive) and M (negative), using a 2.5 mm² minimum wire gauge.
  3. Wire analog input signals to the IN1-IN10 terminals (shielded twisted-pair cable recommended).
  4. Connect proportional valves to the OUT1-OUT10 terminals (verify valve coil resistance before connection).
  5. Configure channel parameters (gain, offset, limit) via front-panel DIP switches or CANopen communication.
  6. Apply power and perform a functional test to verify signal transmission and valve response.
  7. Secure all wiring with strain reliefs and ensure proper cable routing to avoid electromagnetic interference.

Important Safety & Maintenance Notes

– Installation must be performed by qualified personnel trained in hydraulic control systems.

– Disconnect all power sources and relieve hydraulic pressure before servicing the module.

– Do not exceed the maximum output current rating to prevent coil or module damage.

– Perform semi-annual inspection of electrical connections and functional testing.

– Keep the module free of hydraulic fluid contamination; use corrosion-resistant connectors in harsh environments.

Document Revision: 4.2 | Date: January 2026 | Bosch Rexroth AG – Hydraulics Division

Model Configuration: MUXA2 (Multiplexer Type) | 10 (10 Channels) | V0 (Standard Voltage) | 1A (1A Output) | CE Certified | RoHS Compliant
2026-01-19 BY
IN Company News, PCL module

Woodward 8516-039 Speed Control Module

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

The Woodward 8516-039 is a high-performance electronic speed control module designed for governing internal combustion engines, gas turbines, and industrial prime movers. This module is part of Woodward’s proven line of digital control products, delivering precise speed regulation and reliable operation in critical power generation and industrial applications.

Engineered for durability and ease of integration, the 8516-039 features a compact design, robust construction, and compatibility with a wide range of engine types, making it suitable for both stationary and mobile power systems.

Woodward 8516-039 Speed Control Module

2. Technical Specifications

  • Supply Voltage: 10-32 VDC (nominal 24 VDC)
  • Speed Sensing Input: Magnetic pickup (0-200 Hz) or hall effect sensor
  • Control Output: 4-20 mA / 0-10 VDC (adjustable) or PWM signal
  • Speed Regulation Accuracy: ±0.25% of set speed
  • Operating Temperature: -40°C to +85°C (-40°F to +185°F)
  • Protection Rating: IP65 (enclosure) / IP20 (circuit board)
  • Dimensions: 145mm (L) × 95mm (W) × 45mm (H)
  • Mounting: DIN rail or panel mount (4-20 UNF threaded holes)
  • Communication: Optional RS-485 (Modbus RTU) for remote monitoring/configuration

3. Installation & Setup

  1. Mount the module in a vibration-damped location, away from extreme heat or moisture.
  2. Connect the power supply to terminals marked +V (positive) and GND (ground), observing correct polarity.
  3. Wire the speed sensor to the SENSE+ and SENSE- terminals (shielded cable recommended).
  4. Connect the output signal to the engine actuator (verify actuator compatibility before connection).
  5. Set the desired speed using the front-panel potentiometer or via software configuration.
  6. Apply power and perform a functional test to verify speed regulation and output response.
  7. Secure all wiring with strain reliefs to prevent damage from vibration or movement.

Important Safety & Maintenance Notes

– Installation must be performed by qualified personnel familiar with engine control systems.

– Disconnect all power sources before wiring or servicing the module.

– Do not exceed the maximum voltage/current ratings to prevent component damage.

– Perform quarterly functional checks and annual calibration to maintain performance.

– Keep the module free of dust and contaminants; avoid exposure to corrosive gases or liquids.

Document Revision: 3.0 | Date: January 2026 | Woodward, Inc. – Engine Control Systems Division

Part Compatibility: Compatible with Woodward 8500 series control systems | RoHS Compliant | UL Listed
2026-01-19 BY
IN Company News, PCL module

PTX 59B2-TC-A1-CA-H4-PN Pressure Transmitter

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

 

The PTX 59B2-TC-A1-CA-H4-PN is a high-precision industrial pressure transmitter designed for harsh process control environments. Engineered with advanced piezoresistive sensing technology, it delivers reliable and accurate pressure measurement for oil & gas, chemical processing, and industrial automation applications.

This model features a rugged stainless steel construction, corrosion-resistant materials, and a hermetically sealed design to ensure long-term stability and performance in extreme operating conditions, including high temperature and vibration environments.

PTX 59B2-TC-A1-CA-H4-PN Pressure Transmitter

2. Technical Specifications

  • Measurement Range: 0-100 bar (configurable up to 500 bar)
  • Output Signal: 4-20 mA (2-wire) with HART 7.0 communication
  • Accuracy: ±0.075% of full scale (including linearity, hysteresis, repeatability)
  • Operating Temperature: -40°C to +125°C (-40°F to +257°F)
  • Process Connection: 1/2″ NPT male (stainless steel 316L)
  • Electrical Connection: Cable gland (PG9) / DIN 43650 A connector
  • Pressure Rating: 400% overload protection
  • Enclosure Rating: IP67 (NEMA 4X)
  • Power Supply: 10.5-45 VDC (loop-powered)

3. Installation Instructions

  1. Mount the transmitter in a vertical or horizontal orientation, ensuring minimal vibration exposure.
  2. Clean the process connection port to remove debris before installation.
  3. Torque the process connection to 55 N·m (40 ft-lb) using a calibrated torque wrench.
  4. Connect the 2-wire signal cable to the terminal block (polarity-sensitive: +V to positive, -V to negative).
  5. Seal all cable entry points to maintain IP67 enclosure rating.
  6. Apply power to the transmitter and verify output signal (4 mA at zero pressure, 20 mA at full scale).
  7. Calibrate the transmitter using HART communicator if necessary (refer to calibration section).

Important Safety & Maintenance Notes

– Installation and maintenance must be performed by certified personnel only.

– Isolate process pressure and disconnect power before servicing the transmitter.

– Do not exceed the maximum pressure or temperature ratings to prevent sensor damage.

– Perform periodic calibration (every 6-12 months) to maintain accuracy specifications.

– Avoid exposure to corrosive chemicals unless compatible with 316L stainless steel material.

Document Revision: 2.1 | Date: January 2026 | Industrial Process Instruments Division

Model Configuration: TC (Temperature Compensated) | A1 (Analog Output) | CA (Chemical Resistant) | H4 (High Temp) | PN (NPT Connection)
2026-01-19 BY
IN Company News, DCS module, PCL module

GE IS2020RKPSG2A Power Supply Module

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

 

The IS2020RKPSG2A is a key component of the GE Mark VIe control system, designed to provide reliable and stable power supply for industrial turbine control applications. This module is engineered to meet the rigorous requirements of power generation and industrial automation environments.

Manufactured by General Electric, this power supply unit ensures continuous operation under harsh industrial conditions, with built-in protection mechanisms to prevent overvoltage, overcurrent, and short circuit issues.

Related Series:

IS400UCSBH1ABR2 

IS220PVIBH1A 

IS230PCAAH1B

 IS200WROBH1A 

IS200TREGH1B 

IS200TPROH1C 

GE IS2020RKPSG2A Power Supply Module

2. Technical Specifications

  • Input Voltage: 100-240 VAC, 50/60 Hz
  • Output Voltage: 24 VDC @ 5A (nominal)
  • Operating Temperature: -20°C to +60°C
  • Dimensions: 190mm (W) x 120mm (H) x 80mm (D)
  • Protection Class: IP20

3. Installation Guidelines

  1. Mount the module securely to a DIN rail in the control cabinet.
  2. Ensure proper electrical grounding before connecting power cables.
  3. Connect input power to the terminal block marked “AC IN”.
  4. Connect load devices to the “DC OUT” terminals (positive/negative).
  5. Verify all connections before powering on the system.

Important Safety Notes

– Only qualified personnel should perform installation and maintenance.

– Disconnect all power sources before servicing the module.

– Do not operate the module outside the specified environmental conditions.

Document Revision: 1.0 | Date: January 2026 | General Electric Power Systems
2026-01-19 BY
IN Company News, DCS module, PCL module

KCM Ill P0000064193.1 Control Module

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

 

Intermediate Technical Document

1. Basic Device Information

  • Model Number: KCM Ill P0000064193.1
  • Product Type: Industrial Control & Monitoring Module
  • Application: Industrial Process Regulation, Machinery Control, Automation Systems
  • Design Standard: IEC 61508 (SIL 2), EN 60204-1

 

2. Key Features

• Compact design for space-constrained industrial enclosures

• Support for digital/analog signal processing and conversion

• Operating temperature range: -20°C to +60°C (wide temperature adaptability)

• Built-in self-diagnostic function for fault detection and alarm

• Compatible with mainstream industrial communication buses (CANopen, Modbus RTU)

3. Technical Specifications

Parameter Specification
Power Supply 24 VDC (20-28 VDC), 300 mA typical
Input/Output 8 Digital Inputs, 4 Digital Outputs, 2 Analog Inputs (0-10V/4-20mA)
Communication Port 1 x RS485, 1 x Ethernet (optional)
Dimensions (W×H×D) 90 mm × 120 mm × 80 mm
Protection Rating IP40 (front panel), IP54 (when mounted)

4. Important Notes

• Installation must be performed by certified industrial automation technicians.

• Annual calibration and functional testing are required to maintain accuracy.

• Ensure proper grounding to prevent electromagnetic interference (EMI).

• Refer to the official product manual for detailed operation and maintenance guidelines.
2026-01-19 BY
IN Company News

ABB PHARPS32000000 Process Automation Remote I/O Module

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

 

• High reliability and stability for continuous industrial operation

• Support for multiple communication protocols (Modbus, Profibus, Ethernet/IP)

• Wide operating temperature range: -40°C to +70°C

• Redundant power supply design for fault tolerance

• Easy integration with ABB DCS systems (System 800xA, Freelance)

Related Series:

ABB PU410 3BSE056478R1

ABB PM901F 3BDH001001R0001

ABB PHARPS32000000

ABB PHARPS32000000

ABB PHARPS32000000 Process Automation Remote I/O Module

3. Technical Specifications

Parameter Specification
Power Supply 24 VDC (18-32 VDC), 500 mA max
Input/Output Channels 16 Digital Inputs, 8 Digital Outputs, 4 Analog Inputs (4-20mA)
Communication Interface 1 x Ethernet (RJ45), 1 x RS485
Dimensions (W x H x D) 120 mm x 220 mm x 150 mm
Protection Class IP20 (front), IP65 (when installed in cabinet)

 

4. Important Notes

• The module must be installed and commissioned by qualified ABB technicians.

• Regular maintenance (every 6 months) is recommended to ensure optimal performance.

• Comply with local safety regulations and ABB product documentation during operation.
2026-01-17 BY
IN Company News

KOLLMORGEN 63025-01D LS5F Digital Servo Drive Controller

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

 

The KOLLMORGEN 63025-01D LS5F is a high-performance digital servo drive controller designed for precision motion control applications in industrial automation. This advanced drive controller provides exceptional performance, reliability, and flexibility for a wide range of servo motor control systems.

Part of KOLLMORGEN’s industry-leading servo drive portfolio, the 63025-01D LS5F incorporates state-of-the-art digital signal processing technology, advanced control algorithms, and comprehensive connectivity options. Its robust design and sophisticated feature set make it suitable for demanding motion control applications in manufacturing, robotics, packaging, and other industrial sectors.

This servo drive controller offers superior performance with its high-resolution feedback processing, advanced motion control capabilities, and intelligent diagnostic functions, making it an ideal solution for modern industrial automation systems requiring precision motion control and reliable operation.

KOLLMORGEN 63025-01D LS5F Digital Servo Drive Controller

KOLLMORGEN 63025-01D LS5F Digital Servo Drive Controller

Technical Specifications

 

Power Supply

  • Voltage Range: 180-528 V AC (3-phase)
  • Frequency: 50/60 Hz
  • Current Rating: 15 A continuous, 30 A peak
  • Power Rating: 7.5 kW continuous
  • Efficiency: > 95%

Motor Control

  • Control Modes: Velocity, Torque, Position
  • Feedback Types: Encoder, Resolver, Hall Effect
  • Encoder Resolution: Up to 23-bit absolute
  • Control Loop Update: 62.5 μs
  • Position Accuracy: ±1 encoder count

Communication

  • Ethernet: 10/100 Base-T, EtherCAT
  • Fieldbus: Profibus DP, DeviceNet, CANopen
  • Serial: RS-232, RS-485
  • Protocols: Modbus, Profibus, EtherNet/IP
  • Expansion: Optional communication modules

I/O Interface

  • Digital Inputs: 8 channels, 24 V DC
  • Digital Outputs: 6 channels, 24 V DC, 0.5 A
  • Analog Inputs: 2 channels, ±10 V, 12-bit
  • Analog Outputs: 2 channels, ±10 V, 12-bit
  • Relay Outputs: 2 channels, 250 V AC, 2 A

Installation and Maintenance

Installation Guidelines

The KOLLMORGEN 63025-01D LS5F should be installed by qualified personnel following KOLLMORGEN’s installation instructions and applicable safety standards. Proper installation is essential for reliable operation and system performance.

Key installation considerations include: appropriate mounting location with adequate ventilation, proper electrical connections, correct motor and feedback wiring, adequate clearance for heat dissipation, and compliance with local electrical codes. The drive should be installed in a clean, dry environment with proper access for maintenance and operation.
2026-01-16 BY
IN Company News

ABB PU410 3BSE056478R1 Process Controller

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

1. Basic Specifications
Model Number: 3BSE056478R1 (PU410)
Device Type: Process Controller Unit for ABB 800xA System
Operating Voltage: 24 V DC (18 – 30 V DC)
Power Consumption: Max 25 W
Operating Temperature: 0 °C to 60 °C (32 °F to 140 °F)

Storage Temperature: -40 °C to 70 °C (-40 °F to 158 °F)

Related Series:

ABB PM901F 3BDH001001R0001

ABB 5SHX1445H0002 3BHL000387P0101

ABB UUD148AE02 3BHE014185R0002

ABB PM886 BSE050198R1

ABB CP6415 1SAP541510R0001

ABB NGC8206

ABB PCD231B 3BHE025541R0101

ABB PU410 3BSE056478R1 Process Controller

Sample picture

 

2. Functional Description
The ABB PU410 (3BSE056478R1) is a high-performance process unit designed for use in the ABB 800xA automation system. It serves as the core processing component for industrial control applications, providing reliable and real-time control of industrial processes.
Key features include integrated communication interfaces (Ethernet, PROFIBUS), redundant power supply support, and compliance with industrial safety standards (IEC 61508, SIL 2). The unit supports hot-swappable installation, minimizing downtime during maintenance.
3. Installation Requirements
Mounting: 19-inch rack mount (standard industrial cabinet)
Humidity: 5% to 95% non-condensing
Shock Resistance: 15 g (11 ms, half sine wave)
Vibration Resistance: 5 g (10 – 2000 Hz)
Cable Requirements: Shielded twisted pair (STP) for signal cables, minimum 0.75 mm² for power cables
Important Notes
• Only qualified personnel should install and maintain the PU410 unit.
• Ensure proper grounding before powering on the device to prevent electrostatic discharge (ESD) damage.
• Regular firmware updates are recommended to maintain optimal performance and security.
Menu
Call us 24/7+86 13395077993

Search for products

Back to Top
Product has been added to your cart
phone: +86 13395077993
to whats
+852 5796 0986
email: 3076784238@qq.com