Main Brands:
Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.
Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com
| Parameter | Value | Description |
| Supply Voltage Range | 4.5V to 16V DC | Operating voltage range |
| Operating Temperature | -40°C to 105°C | Industrial temperature range |
| Output Current | 200mA (max) | Source or sink capability |
| Timing Range | Microseconds to hours | Adjustable via external components |
| Power Consumption | 3mA (typical @ 5V) | Quiescent current |
| Package Type | 8-pin DIP/SOIC | Dual In-line Package/Small Outline IC |
CCC PSMU-350-3
Pin Configuration
| Pin Number | Name | Function Description |
| 1 | GND | Ground (0V) connection |
| 2 | TRIG | Trigger input: activates timing cycle when voltage falls below 1/3 VCC |
| 3 | OUT | Output pin: provides high or low signal (sinks/sources up to 200mA) |
| 4 | RESET | Reset input: active low, resets timer when pulled below 0.8V |
| 5 | CTRL | Control voltage: adjusts threshold levels (normally bypassed with 0.01µF capacitor) |
| 6 | THRESH | Threshold input: resets output when voltage exceeds 2/3 VCC |
| 7 | DISCH | Discharge: provides discharge path for external capacitor |
| 8 | VCC | Positive power supply (4.5V to 16V) |
The CCC IOC-555-D is a highly stable integrated circuit designed for generating accurate time delays or oscillation. It consists of two voltage comparators, an RS flip-flop, a discharge transistor, and a resistor divider network.
The threshold and trigger levels are normally two-thirds and one-third of VCC, respectively. These levels can be altered by using the control-voltage terminal (pin 5). When the trigger input (pin 2) falls below the trigger level, the flip-flop is set, and the output (pin 3) goes high. If the trigger input is above the trigger level and the threshold input (pin 6) is above the threshold level, the flip-flop is reset and the output is low.
Leave a comment
Your email address will not be published. Required fields are marked *