2026-01-07 BY
IN Company News

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

 

1. Basic Information

Model Number: CGSS1C6V2R1X
Manufacturer: Det-Tronics (a Honeywell company)
Product Category: Fixed Gas Detection Sensor
Product Status: In Stock / Active Production
Country of Origin: United States
Det-Tronics CGSS1C6V2R1X Gas Detection Sensor Module

2. Technical Specifications

Power Supply: 18-30 VDC (24 VDC nominal)
Detection Gas: Combustible Gases (LEL), Toxic Gases (CO, H2S, O2 optional)
Detection Range: 0-100% LEL (combustible), 0-500 ppm (CO), 0-200 ppm (H2S)
Accuracy: ±5% of reading (typical)
Response Time: < 30 seconds (T90)
Operating Temperature: -40°C to +70°C
Dimensions (W×H×D): 152mm × 127mm × 89mm
Weight: Approx. 1.2 kg
Output Signal: 4-20mA DC, Modbus RTU, HART (optional)
Protection Rating: IP66 / NEMA 4X

3. Application Scenarios

– Oil and gas exploration and production facilities
– Refineries and petrochemical plants
– Chemical manufacturing plants
– Power generation facilities (fossil fuel, biogas)
– Marine and offshore platforms
– Mining and metallurgical operations

4. Installation & Maintenance

Mounting Type: Wall / Pipe Mount (3/4″ NPT thread)
Wiring: Explosion-proof conduit connections
Sensor Life: 2-5 years (depending on gas type and environment)
Calibration Interval: 6-12 months (per site requirements)
Certifications: ATEX, IECEx, UL/cUL, CSA, FM approved
Warranty Period: 24 months from delivery date

5. Important Notes

– Install the sensor in accordance with local safety codes and regulations.
– Perform regular calibration with certified gas mixtures to ensure accuracy.
– Do not install in areas with excessive vibration or corrosive atmospheres.
– Ensure proper grounding to prevent electrical interference and static discharge.
– Only qualified personnel should perform installation, calibration or maintenance.