Call us 24/7+86 13395077993
My Header Store Notice
Call us 24/7+86 13395077993

News

Home / News (Page 30)
2026-02-28 BY
IN Company News

ABB PFXC141-IP65 3BSE029997R1 Field Controller Module

Main Brands:

Bently, Triconex, Woodward, Foxboro,Reliance, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAWA, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
website：www.bxplc2.com
Email: 3076784238@qq.com

1. Module Overview
The ABB PFXC141-IP65 (3BSE029997R1) is a rugged field-mounted controller designed for harsh industrial environments, specifically engineered to provide reliable process control and data acquisition in outdoor or high-humidity applications.
With IP65 enclosure rating, the PFXC141 supports seamless integration with ABB’s AC 800M DCS system, offering 14 configurable I/O channels, built-in communication protocols, and robust performance in extreme temperature conditions for oil & gas, chemical, and water treatment industries.

Related  Series:

ABB PFTL101A 2.0 KN 3BSE004172R1 

ABB 3BSE018741R15

ABB PFXC141-IP 65 3BSE029997R1 

ABB PFEA111-65 3BSE050090R65 

ABB PFXC141-IP65 3BSE029997R1 Field Controller Module
2. Technical Specifications
Part Number
3BSE029997R1
Enclosure Rating
IP65 (Dust-tight, Water Jet Protected)
I/O Configuration
14 Configurable Channels (8 AI, 4 AO, 2 DI/DO)
Analog Inputs
4-20mA, 0-10V, Thermocouple (J/K/T/E), RTD (PT100)
Analog Outputs
4-20mA (24V DC powered), 0-10V
Power Supply
24V DC (18-32V DC), Max Power Consumption 12W
Communication
Modbus RTU (RS485), PROFIBUS DP, Ethernet IP
Operating Temperature
-20°C to +60°C (-4°F to 140°F)
Mounting Type
Wall-mount (steel bracket) or DIN rail (35mm)
3. Installation & Configuration
1 Select a suitable mounting location (wall/din rail) with minimal vibration and away from direct sunlight or corrosive gases.
2 Secure the PFXC141 module using the provided mounting bracket and fasteners (torque: 2.5 Nm for DIN rail clips).
3 Connect field wiring to the terminal block (IP65-rated gland plate) – ensure proper wire stripping (8mm) and torque (1.5 Nm).
4 Connect 24V DC power supply to terminals L+/L- (polarity protected) and verify correct grounding (PE terminal).
5 Configure I/O parameters and communication settings via ABB Control Builder or local HMI (optional keypad).
6 Perform loop testing for analog I/O channels and validate communication with the master DCS/PLC system.
Important Safety & Operation Notes
  • Ensure the enclosure cover is fully sealed (torque 1.8 Nm for cover screws) to maintain IP65 protection rating.
  • Use only shielded twisted-pair cables for analog signals to minimize electromagnetic interference (EMI).
  • Disconnect power before opening the terminal cover to prevent electrical shock and module damage.
  • Calibrate analog input channels every 6 months for critical applications (use certified calibration equipment).
  • Do not exceed the maximum input voltage/current ratings (24V DC for digital I/O, 32V DC for power supply).
  • Store configuration backups in ABB Asset Master software to facilitate quick replacement if needed.
  • Inspect the enclosure gasket annually and replace if cracked or worn to maintain environmental protection.
2026-02-28 BY
IN Company News

GE XMTC-62-11 Multi-Loop Temperature Control Module

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

1. Module Overview
The GE XMTC-62-11 is a high-precision, multi-loop temperature controller designed for industrial process control applications, offering reliable temperature regulation for manufacturing, energy, and HVAC systems.
Featuring 6 independent control loops and 11 configurable input/output channels, the XMTC-62-11 supports multiple temperature sensor types (thermocouple, RTD, 4-20mA) and provides advanced PID control algorithms for precise temperature management with ±0.1°C accuracy.
GE XMTC-62-11 Multi-Loop Temperature Control Module
2. Technical Specifications
Control Loops
6 Independent PID Loops
Input Types
J/K/T/E/R/S/B Thermocouple, PT100/PT1000 RTD, 4-20mA
Output Channels
11 Configurable (Relay, 4-20mA, 0-10V, PWM)
Temperature Range
-200°C to +1800°C (-328°F to +3272°F)
Accuracy
±0.1°C (±0.18°F) or ±0.1% of reading
Power Supply
100-240V AC (50/60Hz) or 24V DC
Communication
EtherNet/IP, Modbus TCP/RTU, RS485
Operating Temperature
0°C to +60°C (32°F to 140°F)
Enclosure Rating
IP65 (Front), IP20 (Rear)
3. Installation & Configuration
1 Mount the XMTC-62-11 module into a standard DIN rail (35mm) in a control panel with adequate ventilation (minimum 5cm clearance).
2 Connect power supply (100-240V AC or 24V DC) to the designated terminals, ensuring correct polarity and grounding.
3 Wire temperature sensors (thermocouple/RTD) and output devices (valves, heaters, pumps) to the labeled terminal blocks.
4 Power on the module and access the configuration menu via the front-panel HMI or GE CIMPLICITY software.
5 Configure input types, PID parameters (setpoint, proportional band, integral time, derivative time) and output scaling for each loop.
6 Save configuration, enable auto-tuning for each loop, and verify temperature regulation against setpoints.
Important Safety & Operation Notes
  • Disconnect all power sources before wiring or servicing the XMTC-62-11 module to prevent electrical shock.
  • Use shielded cables for thermocouple/RTD connections to minimize electromagnetic interference (EMI).
  • Calibrate input channels annually using a certified temperature reference to maintain measurement accuracy.
  • Do not exceed the maximum voltage/current ratings of output terminals to avoid module damage.
  • Backup configuration settings to a USB drive or network location before firmware updates.
  • Ensure the control panel ambient temperature remains within 0°C to 60°C to prevent performance degradation.
2026-02-28 BY
IN Company News

ABB PM891K01 3BSE053241R1 Controller Processor Module

Main Brands:

Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

1. Module Overview
The ABB PM891K01 (3BSE053241R1) is a high-performance processor module designed for the AC 800M distributed control system (DCS), specifically engineered for demanding industrial automation applications requiring reliable and fast processing capabilities.
As a key component of the AC 800M system, it provides central processing for control logic execution, data acquisition, and communication with I/O modules and other system components, supporting up to 50,000 function blocks and cycle times as low as 10ms.

Related Series:

ABB PM858K02 3BSE08296R1

ABB CI854BK01 3BSE069449R1 

ABB BC810K02 3BSE031155R1 
ABB CI840A 3RSB04182R1 

ABB TU847 3BSE022462R1 

ABB TK212A 2BSC620197R1 

ABB AI815 3BSE05260461 

ABB AO815 3BSE052605R1 

ABB DI818 3BSE049052R1 

ABB DO818 3BSE069053R1 

ABB TU810V1 3BSE013230R1 

ABB TU818 3BSE069209R1

ABB SD833 3BSC610066R1 

ABB CI867AK01 3BSE09689R1 

ABB CI87101 3BSE092693R1 

ABB PM891K01 3BSE053241R1 Controller Processor Module
ABB PM891K01 3BSE053241R1 Controller Processor Module
ABB PM891K01 3BSE053241R1 Controller Processor Module
ABB PM891K01 3BSE053241R1 Controller Processor Module
2. Technical Specifications
Part Number
3BSE053241R1
Processor Type
32-bit RISC Processor (800 MHz)
Memory Configuration
1 GB RAM, 2 GB Flash Memory
Operating Voltage
24 V DC (20.4 – 28.8 V DC)
Power Consumption
Max 15 W
Operating Temperature
0°C to +60°C (32°F to 140°F)
Communication Interfaces
Ethernet (2x 10/100/1000 Mbps), RS-232, USB 2.0
Redundancy Support
1:1 Hot Standby Redundancy
MTBF (Mean Time Between Failures)
> 200,000 hours
3. Installation & Basic Operation
1 Ensure the AC 800M rack is powered off and grounded properly before module installation.
2 Insert the PM891K01 module into the designated processor slot (Slot 0 or Slot 1 for redundant configuration) and secure with the locking lever.
3 Connect Ethernet cables to the RJ45 ports for communication with engineering station and field devices.
4 Power on the rack and verify the module status LED (green = normal operation, red = fault).
5 Download the control configuration from the ABB Engineering Workplace (EWS) via Control Builder M software.
6 Monitor module performance and diagnostics via the web-based HMI or DCS operator station.
Important Safety & Operation Notes
  • Always follow ABB safety guidelines when handling or installing the PM891K01 module to prevent electrical shock or equipment damage.
  • Redundant configuration requires identical firmware versions on both primary and standby PM891K01 modules.
  • Backup configuration data regularly to a secure location to prevent data loss in case of module failure.
  • Do not remove or insert the module while the rack is powered on (hot-swapping is not supported for processor modules).
  • Firmware updates must be performed during scheduled maintenance windows to avoid disruption of control processes.
  • Ensure proper ventilation around the AC 800M rack to maintain operating temperature within specified limits.
2026-02-28 BY
IN Company News

Panametrics PM880 Ultrasonic Flowmeter

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

 

Panametrics PM880 Ultrasonic Flowmeter
Intermediate Technical Document | Revision 1.0 | Date: 2026-02-28
1. Device Overview
The Panametrics PM880 is a high-performance ultrasonic flowmeter designed for accurate measurement of liquid flow rates in industrial applications. It features non-intrusive measurement technology, ensuring no pressure loss and minimal maintenance requirements.
Key advantages include wide flow range capability, high accuracy (±0.5% of reading), and compatibility with various pipe materials and sizes (DN15 to DN6000).
Panametrics PM880 Ultrasonic Flowmeter
2. Technical Specifications
Measurement Principle
Transit-time ultrasonic
Operating Temperature
-40°C to +180°C
Power Supply
100-240V AC (50/60Hz) or 24V DC
Output Signals
4-20mA, RS485 (Modbus RTU), Pulse, Alarm
IP Rating
IP67 (sensor), IP65 (transmitter)
Response Time
0.1 to 10 seconds (configurable)
3. Basic Operation Steps
1 Power on the PM880 transmitter and wait for the self-test to complete (approx. 30 seconds).
2 Access the configuration menu by pressing the “MENU” button on the front panel.
3 Enter pipe parameters (material, diameter, wall thickness) and fluid properties (temperature, type).
4 Calibrate the sensor alignment using the “CALIBRATE” function to ensure optimal signal strength.
5 Save configuration and exit to the main display to view real-time flow rate and totalized values.
Important Notes
  • Ensure the sensor is installed on a straight pipe section (minimum 10D upstream, 5D downstream) to avoid flow disturbance.
  • Regularly check signal strength (minimum 25 dB recommended) to maintain measurement accuracy.
  • Do not expose the transmitter to extreme voltage fluctuations; use a surge protector if necessary.
  • Calibration should be performed annually or after any major pipe modification.

 
2026-02-27 BY
IN Company News, PCL module

Rexroth PSI63C0.728-L1 Module

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

 

Rexroth PSI63C0.728-L1 Module
Technical Specification & Operating Guidelines
1. Product Overview
The Rexroth PSI63C0.728-L1 is a high-performance servo drive control module belonging to Bosch Rexroth’s PSI6000 series, designed for precise motion control applications in industrial automation systems. It integrates advanced closed-loop control algorithms to deliver exceptional positioning accuracy and dynamic response for servo motors.
Key features include multi-axis synchronization, flexible fieldbus communication, and comprehensive diagnostic capabilities. The module complies with international industrial standards (IEC 61800-5-1, CE, UL) and is optimized for use in machine tools, packaging machinery, and material handling systems.

Related Series:

REXROTH R431003806 

REXROTH R431003808 

REXROTH VT-VPCD-1-12/V0/1-0-1 R901044346 

REXROTH R901089559 VT-VPCD-1-16/V0/1-P-1

 
2. Technical Specifications
Processor: 32-bit DSP + FPGA, 400 MHz clock speed
Control Cycle: 1 ms (position control), 250 µs (current control)
Power Supply: 24 VDC (20-30 VDC) logic supply, 3x 400/480 VAC (380-500 VAC) main supply
Output Current: 7.5 A RMS (continuous), 22.5 A RMS (3s peak)
Operating Temperature: 0°C to +55°C (ambient), -20°C to +70°C (storage)
Communication Interfaces: PROFINET IO, EtherCAT, CANopen, RS-485
Protection Class: IP20 (front), IP54 (optional with housing)
3. Installation Requirements
The PSI63C0.728-L1 module must be installed in a closed control cabinet with proper cooling to ensure stable operation under industrial conditions. Ensure the following during installation:
• Panel mounting with M4 screws (torque 1.5 Nm) or DIN rail mounting (35 mm)
• Minimum 100 mm clearance above/below for forced air cooling (airflow ≥ 0.5 m/s)
• Separation of power and signal cables (minimum 50 mm distance)
• Compliance with Rexroth installation manual (document ID: R911340852)
4. Operational Notes
• The module requires firmware version V4.8 or higher for full EtherCAT synchronization functionality
• Regular maintenance (filter cleaning, cable inspection) should be performed every 6 months
• Configuration and commissioning via Rexroth IndraWorks Engineering software (V15+)
• Fault codes are displayed on the front-panel LED display and stored in the module’s event log; refer to troubleshooting guide (R911340853) for resolution
2026-02-27 BY
IN Company News, PCL module

DEIF PPU3-921006623.10 Module

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

DEIF PPU3 – 921006623.10 Module
Technical Specification & Operating Guidelines
1. Product Overview
The DEIF PPU3  921006623.10 is a premium power protection and control module designed for marine, offshore, and industrial power generation applications. As a core component of DEIF’s Genset & Paralleling product range, it provides precise monitoring, protection, and synchronization of diesel/gas generator sets and AC power systems.
Key features include advanced load sharing, voltage/frequency regulation, and comprehensive alarm & trip functions. The module complies with marine and industrial standards (DNV GL, ABS, IEC 60947, EN 50155) and is engineered for reliable operation in extreme environmental conditions.

Related Series:

DEIF SCM-2 1044220110E

DEIF PCM4.1 

DEIF PPU3-H3-G9

DEIF PPU3 - 921006623.10 Module

2. Technical Specifications
Processor: 32-bit ARM Cortex-M7, 400 MHz clock speed
Memory: 256 KB RAM, 2 MB flash memory (non-volatile)
Power Supply: 24 VDC (18-32 VDC) / 110/230 VAC, typical consumption 6 W
Operating Temperature: -25°C to +70°C (marine grade)
Input/Output: 12 x analog inputs (0-10 V/4-20 mA), 8 x digital inputs, 6 x relay outputs (8 A/250 VAC)
Communication Interfaces: 1 x Ethernet (10/100 Mbps), 2 x RS-485 (Modbus RTU/ASCII), 1 x CANopen
MTBF: > 1,500,000 hours (per Telcordia SR-332)
3. Installation Requirements
The PPU3 921006623.10 module must be installed in a DEIF standard enclosure (IP20/IP54 optional) with proper grounding and surge protection to withstand marine/industrial environmental stressors. Ensure the following during installation:
• DIN rail mounting (35 mm standard) or panel mounting with gasket seal
• Minimum 40 mm clearance for ventilation (critical for marine engine rooms)
• Isolation from vibration sources (max 2 g rms, 10-2000 Hz)
• Compliance with DEIF installation manual (document ID: IM-PPU3-921006623)
4. Operational Notes
• The module requires firmware version 3.8 or higher for full marine certification compliance
• Calibration and functional testing should be performed every 24 months or after marine dry-docking
• Configuration is accessible via DEIF PCM6 software (v5.1+) or local HMI keypad
• Fault diagnostics are available via front-panel LED indicators (POWER, OK, ALARM) and event log; refer to troubleshooting guide (TG-PPU3-921006623) for resolution
2026-02-27 BY
IN Company News

WOODWARD 5464-334 high-performance digital control module

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

 

The WOODWARD 5464-334 is a high-performance digital control module designed for engine and turbine control applications in industrial and power generation environments. It serves as a key component in Woodward’s ProTech® 2000 protection system, providing reliable monitoring and control of critical engine parameters.
Key features include programmable logic control, high-speed signal processing, and seamless integration with Woodward’s control systems. The module complies with industry standards (UL 508, CE) for industrial control equipment and is engineered for long-term reliability in harsh operating conditions.

Related Series:

WOODWARD 8237-1609

WOODWARD 3522-1004 

WOODWARD 8563-391 

WOODWARD 5464-334 Module
WOODWARD 5464-334 Module
WOODWARD 5464-334 Module
2. Technical Specifications
Processor: 32-bit ARM Cortex-M4, 120 MHz clock speed
Memory: 512 KB RAM, 4 MB flash memory (non-volatile)
Power Supply: 24 VDC (18-32 VDC), typical consumption 8 W
Operating Temperature: -40°C to +85°C
Input/Output: 8 x analog inputs (4-20 mA), 6 x digital inputs, 4 x relay outputs (5 A/250 VAC)
Communication Interfaces: 1 x Ethernet (10/100 Mbps), 1 x RS-485 (Modbus RTU), 1 x CAN bus
MTBF: > 2,000,000 hours (per MIL-HDBK-217F)
3. Installation Requirements
The 5464-334 module must be installed in a standard Woodward ProTech® 2000 chassis with proper grounding to prevent electromagnetic interference (EMI) and electrostatic discharge (ESD) damage. Ensure the following during installation:
• Secure DIN rail mounting (35 mm standard) with locking clips
• Minimum 30 mm clearance for ventilation around the module
• Isolation from high-voltage wiring (minimum 150 mm distance)
• Compliance with Woodward installation manual (document ID: 8200-1602)
4. Operational Notes
• The module requires firmware version 4.3 or higher for full functionality and compliance with latest safety standards
• Calibration should be performed every 12 months or after major system maintenance
• Configuration and diagnostics can be accessed via Woodward ConfigTool software or web-based interface
• In case of fault, the module’s LED indicators (POWER, STATUS, ALARM) will provide diagnostic information; refer to troubleshooting guide (document ID: 8200-1603) for resolution
2026-02-27 BY
IN Company News

ABB AC800PEC-PPD113 Module

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

 

ABB AC800PEC – PPD113 Module
Technical Specification & Operating Guidelines
1. Product Overview
The PPD113 is a core processing module for the ABB AC800PEC controller system, designed for high-performance process control applications in industrial environments. It integrates advanced processing capabilities with robust communication interfaces to ensure reliable operation in harsh industrial conditions.
Key features include real-time data processing, multi-protocol communication support, and seamless integration with ABB’s industrial automation ecosystem. The module complies with international industrial standards (IEC 61508, IEC 61131-3) for functional safety and programming.
ABB AC800PEC-PPD113 Module
2. Technical Specifications
Processor: 32-bit RISC processor, 800 MHz clock speed
Memory: 1 GB RAM, 2 GB flash memory (non-volatile)
Power Supply: 24 VDC (18-32 VDC), typical consumption 15 W
Operating Temperature: -20°C to +60°C
Communication Interfaces: 2 x Ethernet (10/100/1000 Mbps), 1 x RS-485, 1 x USB 2.0
MTBF: > 1,000,000 hours (per IEC 61709)
3. Installation Requirements
The PPD113 module must be installed in a standard ABB AC800PEC rack (type PM890) with proper grounding to prevent electrostatic discharge (ESD) damage. Ensure the following during installation:
• Secure mechanical mounting with torque 2.5 Nm for fixing screws
• Minimum 50 mm clearance for ventilation around the module
• Isolation from high-voltage equipment (minimum 100 mm distance)
• Compliance with ABB installation manual (document ID: 3BSE080678)
4. Operational Notes
• The module requires firmware version 6.1 or higher for full functionality
• Regular firmware updates are recommended to address security patches and performance improvements
• Diagnostic data can be accessed via ABB Control Builder M or web-based HMI interface
• In case of fault, the module’s LED indicator (STATUS) will show red; refer to the troubleshooting guide (3BSE080679) for resolution
Document Revision: 2.1 | Last Updated: 2026-02-27
© ABB Ltd. 2026 – All rights reserved
2026-02-26 BY
IN Company News

ABB UAD155A0111 3BHE029110R0111 Industrial Control Module

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

INTERMEDIATE DOCUMENT

ABB UAD155A0111 | Part No.: 3BHE029110R0111

Product Identification

Model Number ABB UAD155A0111
Part Number 3BHE029110R0111
Product Category Industrial Control Module
Manufacturer ABB Group

Document Status

Status: In Progress

Last Updated: February 26, 2026

Next Review Date: March 15, 2026

Notes & Remarks

1. This intermediate document serves as a preliminary record for ABB UAD155A0111 (3BHE029110R0111) before final certification.

2. All technical specifications are subject to verification and validation by the ABB quality control department.

3. Any modifications to the product information must be documented and approved by the ABB engineering team.

4. The part number (3BHE029110R0111) is a unique identifier for ABB supply chain and inventory management purposes.

Related Series:

ABB PPD103A102 3BHE013692R0102

ABB 3BHE002677R0095

ABB UNS0007A-P.V1 HIEE305098R0001

ABB UAD155A0111 3BHE029110R0111 Industrial Control Module

ABB UAD155A0111 3BHE029110R0111 Industrial Control Module
2026-02-26 BY
IN Company News

DAMETRIC PDU-RM3 VAL0122989 Industrial Measurement Device

Main Brands:
Bently, Triconex, Woodward, Foxboro, Westinghouse, Reliance, Schneider, Modicon, ABB, Allen-Bradley, Motorola, GE, Yaskawa, Bosch Rexroth, ACSO, YOKOGAW, NI, ICS Triplex, Kollmorgen, Mitsubishi, MOOG, Emerson, B&R, SST, ALSTOM, EPRO, HIMA, HONEYWELL prosoft, AMAT.

Wei Xiu zhu
WhatsApp:+852 5796 0986
Wechat:13395077993
Zhejiang Yiwu Beixun Automation Technology Co., Ltd
China (Zhejiang) Pilot Free Trade Zone, No. 2 Chunpai Road, Beiyuan Street, Yiwu City, Jinhua City, 7F 7059
Website：www.bxplc2.com
Email:3076784238@qq.com

 

INTERMEDIATE DOCUMENT

DAMETRIC PDU-RM3 | Serial No.: VAL0122989 | SKC: 9194852

Datasheet:

PDU-RM3 FI

Product Identification

Model Number DAMETRIC PDU-RM3
Serial Number VAL0122989
SKC Code 9194852
Product Category Industrial Measurement Device
Manufacturer DAMETRIC Precision Instruments

Document Status

Status: In Progress

Last Updated: February 26, 2026

Next Review Date: March 15, 2026

Notes & Remarks

1. This intermediate document serves as a preliminary record for DAMETRIC PDU-RM3 (VAL0122989 | SKC9194852) before final certification.

2. All technical specifications are subject to verification and validation by the quality control department.

3. Any modifications to the product information must be documented and approved by the engineering team.

4. The SKC code (9194852) is a unique identifier for supply chain and inventory management purposes.

Related Series:

DAMETRIC  LDU-RM1 VAL0122977 SKC9068232
DAMETRIC  POM-RM1 VAL0123032 SKC9068249
DAMETRIC  HPM-RM1 VAL0122850 SKC9068256

DAMETRIC  CMD-RM2 VAL0173903 SKC9101601
DAMETRIC  CMI-RM1 VAL0122828 SKC9068191
DAMETRIC  VIM-RM1 VAL0123136 SKC9068201
DAMETRIC  MPM-RM2 VAL0122979 SKC9374469
DAMETRIC  TVD-RM3 VAL0123117 SKC9251496
DAMETRIC  OTM-RM1 VAL0122982 SKC9068263
DAMETRIC  PDU-RM3 VAL0122989 SKC9194852
DAMETRIC  CMA-RM1 SKC9315772

DAMETRIC PDU-RM3 VAL0122989 Industrial Measurement Device

Menu
Call us 24/7+86 13395077993

Search for products

Back to Top
Product has been added to your cart
phone: +86 13395077993
+86 133 9507 7993
email: 3076784238@qq.com